Professional with over a decade of experience, ranging from application development to system & infrastructure administration. He's worked with small startups to large corporate companies, using unique and creative solutions to solve problems.

Overview This tutorial will walk you through configuring your network configurations on CentOS 6.X. There are three different methods to choose from, depending on what installation type and packages you have installed. Manual configuration is done by directly modifying the configuration files. You will need to be comfortable with the command-line for this one.

However, this will give you the most flexibility and is worth learning. System Config Network is a command-line tool that presents a very basic graphical interface.

This a great tool for those who just want to quickly configure the network and do not require advanced features, like interface bonding (teaming). And lastly, from a Gnome desktop. This for those trying Linux out and have yet to venture into command-line territory, or have no interest in it at all. Manual Configuration This configuration is done by modifying the network configuration directly, using a text editor. This method is typical for servers, and is a more advanced way of doing it. Set the Hostname • Open the following file into a text editor, like VI or Nano.

Vi /etc/sysconfig/network • Change the hostname value to the fully qualified name of your computer. NAME='System eth0' • Save your changes and exit the text editor.

Now that you know which chipset is on your card, you can start figuring out what is required to make the chipset work in openSUSE - usually you'll just need to install a driver and/or some firmware. 16.2 Recent Broadcom Chipset. The Linux kernel comes with the brcm80211 driver by default. This driver supports bcm4313,. ## Restart Network Interface. /etc/init.d/network restart. ## Configure DNS Server. # vi /etc/resolv.conf. I had followed the instructions mentioned but still it's not working, what would be the name server ip address if i m using wireless network(home), i am using wireless.

• Restart the network service. Service network restart Using the System Config Network Tool The System Config Network tool is a terminal application that presents a very basic GUI. It can do basic network configurations, such as configuring static or dhcp addresses, setting the DNS server IP addresess, and setting the default gateway. Install System Config Network The base CentOS 6 installation includes the tool by default.

To install it on a minimal installation, follow these instructions. • Install it from the yum repository. Yum intall system-config-network • If you have no Internet access, install it from the CentOS DVD. Create a directory in /media called cdrom.

Mkdir -p /media/cdrom • Mount the CentOS DVD to the directory. Mount /dev/cdrom /media/cdrom • Run yum and target the repository that uses the DVD. Yum --repodisable=/* --repoenable=c6-media install system-config-network Configure the Network Settings • Launch the System-Config-Network tool from the terminal. System-config-network-tui • Ensure Device Configuration is highlighted, and then press Enter. • Select the network interface you want to configure, and then press Enter. • For Dynamic IP address allocation, ensure the Use DHCP box is checked. Otherwise, for static IP address allocation, enter the static IP address, netmask, default gateway, and DNS server infomation.

• Tab to highlight Ok, and then press Enter. • Press tab until Save is highlighted, and then press Enter to save your changes.

• Press tab until Save&Exit is highlighted, and then press Enter to save your changes. • To apply your changes, restart your network services. Service network restart From a Gnome Desktop Gnome is the default environment for CentOS 6 Desktop installations. There are plenty of alternative environments that can be installed, but being the default, this one is more widely used. • Click to expand the Sytem menu, expand Preferences, and then click Network Connections.

• From the list of connections in Network Connections application, select the interface you want to configure. • Click Edit. • Click the IPv4 Settings tab. Set a DHCP Address • From the Method drop-down list, select Automatic (DHCP). • If required by your DHCP server, set a Client ID in the DHCP Client ID input box. • Click Apply to save your changes.

Set a Static IP Address • From the Method drop-down list, select Manual. • Click the Add button, located beside the Addresses table. • Enter an IP address into the Address field.

Contoh Soal Psikotes Gratis Pdf Maken there. • Enter a subnet mask in the Netmask field. • Enter the gateway address in the Gateway field.

• Enter the IP addresses of your DNS servers in the DNS servers input box, separating each entry with a comma. • Enter your search domain suffexes in the Search Domains input box, separating each entry with a comma. • Click Apply to save your changes.

Conclusion Following one of the three examples above, you should now have a configured network connection. There are more advanced configurations that can be done, like bonding connections together to increase throughput or add fault tolerance, but those subjects are too advanced for this tutorial.

Getting Started with OctoPi Please follow these steps after downloading • Unzip the image and install the contained.img file to an SD card. • Configure your WiFi connection by editing octopi-network.txt on the root of the flashed card when using it like a thumb drive. • Boot the Pi from the card. • Log into your Pi via SSH (it is located at octopi.local or the IP address assigned by your router), default username is “pi”, default password is “raspberry”.

Change the password using the passwd command. You do not need to expand the filesystem, current versions of OctoPi do this automatically. • Access OctoPrint through or https is available too, with a self-signed certificate.

Please also refer to, especially the. Created a great video guide on how to get OctoPi 0.12 up an running. Installing from source The generic setup instructions boil down to • Installing including and. • Obtaining the source through either of: • cloning the: git clone • downloading an from Github and unpacking it • Creating a (user owned) virtual environment in the source folder: virtualenv venv • Installing OctoPrint into that virtual environment:./venv/bin/python setup.py install • OctoPrint may then be started through./venv/bin/octoprint or with an absolute path /path/to/OctoPrint/venv/bin/octoprint More specific setup instructions for the most common runtime environments can be found below.

Linux For installing OctoPrint from source, please take a look. They should be pretty much identical on other Linux distributions. Windows For installing OctoPrint on a Windows system, please take a look.

Mac For installing OctoPrint on a Mac, please take a look. Getting Started with OctoPi Please follow these steps after downloading • Unzip the image and install the contained.img file to an SD card. • Configure your WiFi connection by editing octopi-network.txt on the root of the flashed card when using it like a thumb drive. • Boot the Pi from the card.

• Log into your Pi via SSH (it is located at octopi.local or the IP address assigned by your router), default username is “pi”, default password is “raspberry”. Change the password using the passwd command. You do not need to expand the filesystem, current versions of OctoPi do this automatically.

• Access OctoPrint through or https is available too, with a self-signed certificate. Please also refer to, especially the. Created a great video guide on how to get OctoPi 0.12 up an running. Installing from source The generic setup instructions boil down to • Installing including and. • Obtaining the source through either of: • cloning the: git clone • downloading an from Github and unpacking it • Creating a (user owned) virtual environment in the source folder: virtualenv venv • Installing OctoPrint into that virtual environment:./venv/bin/python setup.py install • OctoPrint may then be started through./venv/bin/octoprint or with an absolute path /path/to/OctoPrint/venv/bin/octoprint More specific setup instructions for the most common runtime environments can be found below. Linux For installing OctoPrint from source, please take a look.

They should be pretty much identical on other Linux distributions. Windows For installing OctoPrint on a Windows system, please take a look. Mac For installing OctoPrint on a Mac, please take a look.